Exhibitor Advisory Council: How Trade Show Organisers Set One Up and Use It

About 25 per cent of exhibitors at Intermodal EXPO respond to its post-event surveys, according to Robin Troy of the Intermodal Association of North America (IANA), which runs the freight transport show (IAEE, September 2025). That leaves the organiser with limited feedback from most of its exhibitors.

In the same IAEE article on research by the Center for Exhibition Industry Research (CEIR) into midsize shows, only 25 per cent of midsize exhibition organisers are reported to track exhibitor Net Promoter Score (NPS), which measures how likely exhibitors are to recommend the show (IAEE, September 2025). An ongoing conversation can surface problems while there is still time to address them.

An exhibitor advisory council is a standing group of exhibitors who advise show management on rules, services, the floor plan and the programme. To make the meetings worthwhile, tell all exhibitors what you decided and why, including when you decline a proposal. Without a response, meetings can turn into what Trade Show Executive called “a beef session” (July 2024).

As show director, decide who will sit on the council, when it will meet and who will respond to its proposals.

What an exhibitor advisory council is, and what it is not

The published versions of such a council look remarkably alike. The Society for Neuroscience (SfN), the National Funeral Directors Association (NFDA) and the American Mathematical Society (AMS) use almost the same sentence for its purpose: to foster communication between the organiser and its exhibitors. All three also list very similar tasks. Members review the exhibit rules, advise on improvements and give other exhibitors a place to send feedback.

Four published examples show how such councils are built:

Organiser and showExhibitor membersTermMeetings
Society for Neuroscience, annual meetingNine seats in three stand-size tiers, three eachUp to four yearsOnce a year, on the Tuesday of the exhibition
National Funeral Directors Association, conventionAbout 12, from varied stand sizesTwo to four yearsOnce a year in summer, in next year’s convention city
American Mathematical Society, Joint Mathematics MeetingsEight, plus six staff members ex officioTwo yearsOne hour on the third day of the meeting, the rest by email or call
AVIXA, InfoCommNumber not publishedThree yearsThree a year: two online, one in person at the show venue

Sources: SfN and NFDA, Exhibitor Advisory Committee pages; AMS, charge of the Exhibits Advisory Committee; Trade Show Executive, 16 July 2024 (InfoComm); all accessed November 2026.

Two patterns stand out. The groups are small, with about a dozen exhibitor members at most in these examples. And the in-person meeting takes place where exhibitors already are: at the show itself, or at next year’s venue.

The council is easy to confuse with three other bodies, and each needs a different set-up:

  • A customer advisory board gathers a company’s own senior customers to advise on its product strategy. Our guide to the customer advisory board meeting covers that format, which has a different host, different members and a different goal.
  • An association event committee is made up of volunteer members who help plan and run the event. Its typical split of deciding, advising and doing is set out in our guide to the association event committee.
  • A programme committee selects the content of a conference, such as sessions, speakers and abstracts. Exhibitors rarely sit on it, as our article on the conference programme committee explains.

The exhibitor advisory council does none of this. It represents the people who pay for the floor.

Why the council matters more when budgets tighten

Paying for the floor has become harder to justify, and that is exactly why the council’s early warning matters now. The Exhibitor Advocate, an organisation that represents the interests of exhibitors, published these findings in May 2026:

What exhibitors say about the cost of exhibiting

80 %
of exhibitors name cost management as their top challenge
55 %
say increased costs outweigh the value at some events
64 %
are scaling back their overall presence at events
The Exhibitor Advocate with EVOLIO Marketing, The Evolving Landscape of Event Marketing, released alongside the 2025 Annual Survey of Exhibition Rates, via Exhibit City News, 22 May 2026

Read these figures from the show director’s chair. The exhibitor who is about to reduce her stand will not tell you in a survey that three quarters of exhibitors ignore. She might tell you in a room of twelve, if she trusts that something will happen.

That trust is the council’s real product. Jessica Sibila of The Exhibitor Advocate sat on a council early in her career. She told Trade Show Executive it was her one opportunity to talk to the right people in show management.

The rebooking decision itself is made in an exhibitor’s budget review, long before your sales call, as our guide to exhibitor retention shows. A council lets you hear the arguments of that review while you can still change the show.

Who sits on the council

Hearing those arguments depends on who is in the room. A council of only your largest stands is a key account meeting, not an advisory council. Five rules keep the membership representative:

  • Mirror the floor by stand size: SfN reserves three seats each for small, medium and large stands. Small stands are often the majority of your exhibitors and the least heard.
  • Mix newcomers and long-standing exhibitors: The Exhibitor Advocate recommends a wide mix, from start-ups to established companies. First-time exhibitors see problems that regulars have stopped noticing.
  • One seat per company, held by the right person: Invite the exhibit or event manager who plans your show for the company, or the marketing lead who signs off the budget. Stand staff who change every year cannot carry topics from one meeting to the next.
  • Stagger the terms: Terms of two to four years are common. Replace about a third of the members each year, so the council keeps its memory and still hears new voices.
  • Keep your own side small: The show director chairs or sponsors the council, joined by the heads of exhibitor services and operations and one note taker. A room in which staff nearly equal exhibitors in number turns into a briefing.

Recruit through an open call and fill the gaps by invitation. SfN and NFDA both publish an application on their exhibitor pages. Then make the members’ contact details accessible, as The Exhibitor Advocate advises, so other exhibitors can pass their concerns to someone on the council.

Representative beats prominent.

Write the mandate before the first meeting

Once you know who sits at the table, decide what the table is for. The Exhibitor Advocate recommends a purpose statement that defines the council’s role and its boundaries. Send it with the invitation.

The most important boundary is between advising and deciding. The council advises, and the show director decides. Members need to know that, or every declined proposal will feel like a broken promise.

Topics that usually belong in scope:

  • exhibitor rules and regulations, including what members think should change in next year’s exhibitor manual
  • move-in and move-out schedules, freight handling and contractor services
  • the floor plan, aisle widths, catering points and how visitors move through the halls
  • opening hours and the conference programme around the exhibition
  • the meeting programme, lead retrieval and what each exhibitor receives after the show

Topics that stay out: individual disputes, the position of a member’s own stand, contract negotiations and anything commercially sensitive between competitors. Stand placement can still be discussed as a policy. How allocation rules can be made fair and transparent is covered in our guide to booth allocation. The individual case belongs to your sales team.

The competition point deserves care. Members of an exhibitor council are often direct competitors, so they should never exchange prices, discounts, budgets or bidding plans in your meeting. The European Commission’s 2023 Horizontal Guidelines describe when an exchange of information between competitors becomes a problem under EU competition law. This is not legal advice: ask your own counsel to review the mandate, the agenda and the minutes.

The council advises. You decide, and you say so.

A meeting rhythm built around the show cycle

A mandate needs a calendar, and the show cycle provides one. Once a year is the minimum, as the table above shows. AVIXA, the audiovisual industry association, meets three times a year for its trade show InfoComm: twice online and once in person at the show venue, with an evening event before an all-day strategic session (Trade Show Executive, July 2024).

That rhythm can be adapted to most trade shows in five steps:

One year of an exhibitor advisory council

  1. Post-show
    Debrief online Within a month, members bring their own team's feedback and the views of exhibitors who contacted them.
  2. Planning
    Work at the venue One in-person day at next year's venue: walk the hall and loading route, then discuss the proposals.
  3. Before sales
    Publish the decisions Send all exhibitors a short note on what you will change, what you will test and what you will not.
  4. 6 weeks out
    Check the details A short online call on rules, schedules and the meeting programme before the exhibitor manual closes.
  5. Show days
    Meet on site One hour on an early show day to catch problems while they can still be fixed.

The venue day is worth its travel costs. Picture twelve exhibit managers walking the loading route of the hall they will use next year. Within an hour, they find what no floor plan shows: the goods lift that takes one pallet at a time, or the corner where the aisle narrows behind a pillar.

Those are the problems that make exhibitors swear on move-in day.

Turn advice into decisions exhibitors can see

Record the proposals from every meeting and give each one a decision and a reason.

Keep a decision log. Every proposal gets an owner and one of three answers within an agreed time:

  1. We will do it, by a named date.
  2. We will test it, at a named place in the show.
  3. We will not do it, with the reason.

Then publish the log to all exhibitors, not only to council members. The Exhibitor Advocate recommends exactly this: support action items with analytics, and share the results with every exhibitor. A short “you said, we did” note before rebooking opens shows that the show listens.

A published example shows how visible such changes can be. After the 2012 edition of NPE, the plastics show produced by the trade association SPI in Orlando, its exhibitor committee reported that the floor was hard to navigate. For 2015, the organiser created several 20-foot aisles, added six cafés on the show floor and opened a new exhibitor lounge (BizBash, March 2015).

Bring data to every meeting: rebooking by stand size, the results of your exhibitor survey and the numbers from your meeting programme. The council does not replace the survey. It explains it. Which survey questions give the council something to work with is shown in our guide to post-event survey questions.

Solution: If your show runs a meeting programme, Converve’s matchmaking for trade shows and congresses works with a meeting matrix that you configure, so you decide which exhibitor and visitor groups may request meetings with each other. Every meeting is recorded, so you can count the meetings held per exhibitor group, which gives the council figures instead of impressions when it discusses the meeting programme.

A declined idea with a good reason still builds trust.

How to tell whether the council works

The show director has to justify the council too, usually to the organiser’s management or board. Three measures make that easy:

  • The share of proposals that received an answer within the agreed time. Below 100 per cent, the loop is broken.
  • The number of issues that come back year after year. The same complaint in three consecutive meetings means nothing has changed.
  • Rebooking in the segments the council represents, compared with your overall rate. If small stands rebook better after you changed their move-in slots, the council has paid for itself.

Every rule change the council agrees must also reach the exhibitors who never attend a meeting, so mark it as new in next year’s exhibitor kit and exhibitor manual.

Frequently Asked Questions

What is an exhibitor advisory council?

An exhibitor advisory council is a small, standing group of exhibitors who advise a trade show or congress organiser on exhibit rules, services, the floor plan and the programme. Members usually serve terms of two to four years. The council advises, and show management decides and reports back on what it did with the advice.

How many members should an exhibitor advisory council have?

Published examples range from eight to about twelve exhibitor members: the Society for Neuroscience reserves nine seats in three stand-size tiers, NFDA names about 12 and the Joint Mathematics Meetings eight. That size lets everyone speak in a working session.

How often should an exhibitor advisory council meet?

Once a year is the minimum, often during the show. AVIXA meets three times a year for InfoComm, twice online and once in person at the show venue (Trade Show Executive, July 2024). A debrief after the show, a working day during planning and a short check before the show is a practical rhythm.

What is the difference between an exhibitor advisory council and a customer advisory board?

An exhibitor advisory council represents the companies that pay for stands and advises a show organiser on the exhibition. A customer advisory board consists of a company’s senior customers and advises that company on its own product and strategy.

Should council members receive discounts or free stand space?

Usually not. Paid benefits make members look bought, and other exhibitors may see the council as a club for favoured companies. Offer recognition, early information about changes and direct access to show management instead. For Jessica Sibila of The Exhibitor Advocate, that access was the main value of her own council seat (Trade Show Executive, July 2024).

Conclusion: the council is only as good as its report back

Set up a small council that represents different kinds of exhibitors. Write down what it can influence and schedule meetings around decisions such as pricing, stand allocation and rebooking. Respond to each proposal and share the outcomes with all exhibitors.

If you want the meeting programme of your next trade show to give your council figures to work with, get in touch with Converve.

Want matchmaking that fits your event?

Get a free consultation